Automatically find and connect PAX Device's IP Address through MicroSale

Supported: Version 10.0.1050+

Prerequisite: POS Auto-Register must be enabled in the PAX BroadPOS Portal in order to use this feature with MicroSale.

1. Attempt to ping the device’s IP Address
   If unsuccessful, the IP address may have changed or the unit is offline.
2. If your devices have been pre-programmed for “POS Auto Register”, you can reconnect the device to the POS workstation through the MicroSale software.
3. Accessing PAX Settings in MicroSale
   Managers Menu ➔ Register Setup ➔ Terminal Configuration ➔ Credit Card Setup ➔ PAX 03. Bring up the Device/Register Name
4. Click on Find Device (to obtain a new IP)
5. Save